EUTECH INSTRUMENTS DO 6, Инструкция по эксплуатации, Страница: 49 / 76

Instruction Manual DO 6
44
7.6 (rSt.5) Reset to Factory Default
This mode lets you reset all parameters to
factory default settings. There are two
levels of reset:
1) Calibration Reset: - Reset only the
calibration values. This clears all
previous calibrated values and reset
to factory default. See Section 11 for
factory default settings.
2) User Reset: - Clears all data including
calibration and other customized
setup functions and reset it to factory
default. See Section 11 for factory
default settings.
7.6.1 Calibration Reset
From any Set Up menu:
1) Scroll the Set Up main group menu
by using the ▲ and ▼ keys until the
meter displays the Reset to Factory
Default menu “rSt.5”.
2) Press the HOLD/ENTER key to enter
the menu.
3) Press the HOLD/ENTER key to enter
the Calibration Reset menu “A.CAL”.
4) Use the ▲ and ▼ keys to activate or
deactivate the Calibration Reset
selection.
a. YES – activates Calibration
Reset
Figure 26: Calibration reset
selection
HOLD
ENTER
HOLD
ENTER
Calibration
Reset