manualshive.com logo in svg

EUTECH INSTRUMENTS CyberScan pH 5000, Инструкция по эксплуатации, Страница: 26 / 150

Поделиться
Скачать
EUTECH INSTRUMENTS CyberScan pH 5000 Скачать руководство пользователя страница 26

Instruction Manual  

 

            CyberScan pH5500/ 5000 

 

This screen can be used to set the present time which will be 
displayed on the measure screens. This time will also be printed on 
demand and stored in the data storage center of the meter when data 
is saved. There are two formats options for the time. The clock can 
be set as either a 12 hour clock or a 24 hour clock. 
 
 

To Set Time 

 
1.  Access the set time screen from the System Setup screen. The 

current time and numeric keypad are displayed on the screen. 
 

2. Touch 

clear

 to delete the current entry. 

 

3. Touch 

the 

24hr

 or 

12hr 

button to format the clock as either a 12 

hour or a 24 hour clock. 

 
 
 
 
 
 
 
 
 
 
 
 

Current 12HR

Current 24HR

5:15 pm

17:15

4. Touch 

am 

or 

pm

 to set the appropriate time. 

 

5.  Use the numeric touch pad to enter desired time, separating the 

hour and the minutes by touching the “

:

”

  

key in the keypad. 

 

6. Touch 

enter

 to accept the time in the current format 

 

OR 

 
Touch 

exit

 to return to the System Setup screen, without making 

any changes. 

 
 

 

If you do not use the 

“

:

”

, the meter will not accept the time. 

 
 

 

21

Содержание CyberScan pH 5000























































































































































Отзывы:

Нет отзывов