Eusso UNC7825 Series страница 122 Скачать руководство пользователя

Страница: 122 / 127

Appendix B. Upgrade Custom Web Pages

The NDC has a built-in web server, so the web contents are contained in Flash Memory, the same as software parts,

allowed to erase and re-written. It provides an easy way to update the web pages -- just simply load and issue

command from network (FTP and Telnet).

Caution:

The update of content page is very sensitive to system operation; therefore, incorrect operation may

cause system fail to response to any request. The following operations provided here are only for experienced

system integrator. Remember that always consult to your distributor or dealer in advance to update the content.

The following procedures are to update the web page:

1. Clean up system

Before updating the pages, make the NDC back to factory default stage -- open the home page of NDC in your

web browser, go into Configuration -> System -> System Information, click <Load Default> button, click <Apply>

button, and then click <Reboot> button in configuration page. Keep the NDC in an idle state, which stops all video

requests from other station.

2. Download complete web pages

For backup purpose, we should download the complete built-in contents before updating. The pages layout is

described as below:

3.0.0/WWW: Main video pages including static HTML pages and JAVA applets.

3.0.0/WWW/images: All graphical files.

3.0.0/WWW/lang1: All HTML pages for user defined language 1.

3.0.0/WWW/lang2: All HTML pages for user defined language 2.

3.0.0/Sys: Video bitmap font file (Time Stamp and Text Bitmap)

3.0.0/public: Internal message files.

For convenience, some FTP utilities (e.g. CuteFTP, WSFTP) may be useful to download the complete pages

Note:

When you login the system, the default root directory is 3.0.0/. Do not change any file in 3.0.0/Sys, and

3.0.0/public, because these files are only used internally. to update the content.

3. Upload custom web pages

You can use FTP utilities to upload the updated/added contents to their original directory. For example, if you wish

to replace the banner logo (logo.jpg) with your custom made image. First, prepare your own image, and then

upload to 3.0.0/WWW/images.

Note:

Any file upload to the NDC should be set to “binary” mode in FTP utility; otherwise, the file may be

corrupted in the NDC.

- 121 -

Содержание UNC7825 Series































































































































Результаты поиска

Содержание UNC7825 Series

Отзывы:

Похожие инструкции для UNC7825 Series

Бренды по названию

Популярные бренды

Eusso UNC7825 Series, Руководство пользователя

Результаты поиска

Содержание UNC7825 Series

Отзывы:

Похожие инструкции для UNC7825 Series

Бренды по названию

Популярные бренды