3.1
Prepare your PC to configure the UGL2430-RTB
For OS of Microsoft Windows 95/ 98/ Me/XP:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
Note:
Windows Me users may not see the Network control panel. If so,
select
View
all Control Panel options
on the left side of the window
2.
Move mouse and double-click the right button on
Network
icon. The
Network
window will appear.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
6.
Select
TCP/IP
and click the
properties
button on the
Network
dialog box.
7.
Select
Specify an IP address
and type in values as following example.
9
IP Address:
192.168.1.1
, any IP address within 192.168.1.1 to 192.168.1.253 is
good to connect the Wireless LAN Access Point.
9
IP Subnet Mask:
255.255.255.0
8.
Click OK and reboot your PC after completes the IP parameters setting.
For OS of Microsoft Windows 2000, XP:
1.
Click the
Start
button and select
Settings
, then click
Control Panel
. The
Control
Panel
window will appear.
2.
Move mouse and double-click the right button on
Network and Dial-up Connections
icon. Move mouse and double-click the
Local Area Connection
icon. The
Local Area
Connection
window will appear. Click
Properties
button in the
Local Area
Connection
window.
3.
Check the installed list of
Network Components
. If TCP/IP is not installed, click the
Add
button to install it; otherwise go to step 6.
4.
Select
Protocol
in the
Network Component Type
dialog box and click
Add
button.
5.
Select
TCP/IP
in
Microsoft
of
Select Network Protocol
dialog box then click OK
button to install the TCP/IP protocol, it may need the Microsoft Windows CD to
complete the installation. Close and go back to
Network
dialog box after the TCP/IP
installation.
