Eusso UGL2430-RTA Скачать руководство пользователя

Страница: 5 / 68

less than 20cm (8 inches) during normal operation.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN

PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal

Equipment and the mutual recognition of their conformity (R&TTE)

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment

and Satellite Earth Station Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special

attention must be paid to the dangers of electric shock and static electricity when working with electrical

equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure

the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland,

France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United

Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway,

and Switzerland.

EU Countries Not intended for use

None.

Содержание UGL2430-RTA




































































Результаты поиска

Содержание UGL2430-RTA

Отзывы:

Похожие инструкции для UGL2430-RTA

Бренды по названию

Популярные бренды

Eusso UGL2430-RTA, Руководство пользователя

Результаты поиска

Содержание UGL2430-RTA

Отзывы:

Похожие инструкции для UGL2430-RTA

Бренды по названию

Популярные бренды