PROGRAM MENU
With this menu you can program the parameter adjustment of the transmitter device. To move around the menu use the CH + and CH- buttons.
To enter in each section of the menu press the STOP. To exit each section press STOP again.
h (time)
Press the STOP button to modify the hour. When symbol appears you can modify the hour. Using
buttons you can programm current
time. Push STOP to exit from main menu.
d (day)
Press STOP button to modify the day. When symbol appears you can modify the day. Using
buttons you can programm the selected day.
Push STOP to exit from main menu.
CHANNEL (active channels)
Each channel can be enabled or disabled so that the transmitter can be adapted to installation requirements.
Press the STOP button to change channels. When symbol appears, you can change the channel.
Press
keys to move the channels until you reach the desired.
Press CH- to change the channel status. "OFF" appears indicating that the channel is disabled and if "On" is enabled.
Once enabled or disabled all desired channels Press STOP to exit back to main menu. alir al menu principal.
GENERAL (group from 1 to 8)
A GENERAL channel can group individual channels. When the GENERAL channel is selected individual channels that will work as grouped.
Press STOP to group channels. When symbol appears, channels can be grouped.
Press
keys to move the channels until you reach the desired channel.
Press CH-to change the channel status. "OFF" appears indicating that the channel is not added to the general group. If "on" appears indicates
that this channel is added to the general group.
Once the desired channels grouped press STOP to exit to main menu
.
principal.
TIMER (time program from 1 to 6)
It has 6 time schedules to send automatic actions in the day and hour in the selected week.
For the run time programs, you need the timer to be activated. To activate the timer press
keys simultaneously until "ON" appears on the
left side of the time display. If you want to disable the timer, press
keys until "OFF" appears on the left side of the time display.
Select the time schedule to be configured (01 to 06). Press STOP to start modifying the time programming.
d (manual mode day)
Press the STOP button to change the days you want to make such an event schedule. Symbol appears to indicate that you can modify the days.
Press
keys to move the channels until you reach the desired. Press CH- to change the channel status. "OFF" appears indicating that the
channel is disabled and if "On" appears channel is enabled.
Once enabled or disabled all desired channels press the STOP button to go to the next level.
f (Actio to make automatic operation)
Press the STOP button to modify the action you want to make such an event schedule. Symbol appears to indicate that you can modify the
days. Press
keys to move through the different available actions:
order of rise
intermediate position motor (star or venus)
order of descent
intermediate position in TOP-TRONIC engines
Once enabled, press the STOP desired action to pass the next level.
h (hour)
Press the STOP button to change the days you want to make such an event schedule. Symbol appears to indicate that you can modify the
hour. Press
keys to program the hour you want to make such an event schedule.
CHANNEL (channels will react to automatic operation)
Each channel can be enabled or disabled to respond to the automatic operation. Press the STOP button to change the channel symbol appears
to indicate that you can change the channel.
Press the
keys to move the channels until you reach the desired.
Press CH- to change the channel status. "OFF" appears indicating that the channel is disabled. "On" appears if is enabled.
Once enabled or disabled all desired channels Press the STOP button to go the next level. nivel.
GENERAL (general channels will react to automatic operation)
Each channel can usually be enabled or disabled to respond to the automatic operation. Press the STOP button to change the general channels.
Symbol appears to indicate that you can change the channel.
Press the
keys to move the channels until you reach the desired general.
Press CH- to change the overall channel state. "OFF" appears indicating that the overall channel is disabled. "On" appears if is enabled.
Once enabled all channels or disabled all general selected channels press STOP to pass the next level.
Press programming button (back side of the control) to exit to the main menu and thus end the program process.
PROGRAM MENU Press PROG + STOP to enter until
h
will appear
