Seite 9
Comet Aqua
6.3 ADD NEW DEVICE
6.4 CHOOSE WIFI NETWORK
The WiFi network to which your smartphone is connected is automatically display-
ed in this field. If you want to connect your Comet Aqua to a different WiFi network
than the one shown to you, temporarily connect to a different WiFi network in your
smartphone‘s WiFi settings and return to the app. The correct WiFi network is then
displayed under “My WiFi network“.
Enter the password of your WiFi network correctly. This is important because the
app cannot check your home network‘s WiFi password. You will continue to be
guided through the setup wizard despite the incorrect password.
After entering the WiFi password, press Next.
NOTICE:
Comet Aqua can only be integrated into 2.4 GHz WiFi networks. Connection and communication problems can occur in
mixed networks that transmit on both 2.4 GHz and 5 GHz.
NOTICE:
In order for your WiFi network to be automatically displayed in the
“
My WiFi Net-
work“ field, the following factors must be met:
1. Your WiFi network must operate on 2.4 GHz, as Comet Aqua can only be in-
tegrated into a 2.4 GHz WiFi network. This can be viewed in the settings of your
WiFi router and changed if necessary.
2. Your smartphone‘s location approval must be enabled.
3. The WiFi Smart Garden app needs permission to access your location while
using the app. If you have denied location access in the app, go to your smart-
phone settings and adjust the permission. (Android: In the “Apps“ area, you can
grant the “WiFi Smart Garden“ app location access again while using the app.)
Teach in a new device by
clicking on the “Add device“
button (initial commissioning)
or the “+“ button. The set up
assistent starts now and you
are guided through the instal-
lation of your device.
Select the type of device that
you want to include in your
network.
My WiFi Home
