4
•
Install the spring clips on the long and short parts. Spring clips with the black belt
avoid the contact between springs and frame pads.
•
Following the coverall frame pads will be fastened at the trampoline frame.
•
S
tick the white Velcro on the flat surface on each side of the frame
.
•
Place the 4 frame pads (2 for the short side and 2 for the long side) on the frame.
Disassembly
It is not necessary to disassemble the Hobbytramp completely. It is possible to screw
off only the feet, the top part of the frame can be left installed.
The complete disassembly of the Hobbytramp is to be made in reverse order of the
assembly.
3. Maintenance recommendations
The trampolines are to examine for possible damage before use. Particularly it is very
important that frame pads, jumping bed, springs and frame parts are not damaged.
Damages must be repaired immediately. If you are unsure whether the trampoline is
fully functional please contact a competent person to examine.
To check regularly:
•
floor protection
•
frame pads
