GB
Plasma-Lighter „X-ARC TOUCH“ - 41438
Description:
- No flame, no gases, no fuels, wind proof
- New technology electric Arc lighter
- Touch sensor to switch on
- With battery power indicator
- Built in lithium battery Lithium 3.7V 220mAh, charged by USB cable
- About 1 hour charging time can lights up for about 30 times
- All-weather used, works in -10 to +50 degree Celsius
- Material: zinc alloy
Operation:
Charge:
ATTENTION!!!
The returns will be impossible if products were used or damaged because of incorrect use.
DISPOSAL
：
The packaging material is reusable. Dispose of the packaging in an environmentally friendly way by putting it in the appropriate
recyclable waste collection containers.
Dispose of the product and the batteries in view of the environment if you want to separate. The device and the batteries must
not be thrown in with domestic waste. Take them to a recycling center for used electrical and electronic devices. For more
information you can consult your local government. Remove batteries first.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany
0180 . 530 63 63* orin Austria
01 . 230 60 43 12 orin Switzerland
044 . 28 36 12in the Netherlands
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return address stated on your invoice.
© 01.09.2018
1. Open the lid.
2. Touch the side button to switch on the lighter. Close the lid to turn it off or the lighter will turn
off automatically after about 7 seconds.
Remarks:
1. Do not touch the electric wire with your finger.
2. Clean the ash and dust in time.
3. Do not submerge it into any liquid.
1. The 4 LEDs on right side indicate the battery status. When the last LED is on or flash,
please recharge the lighter.
2. Connect the USB cable with the lighter and charger. (USB cable is under the inlay)
3. When charging, the LED lights are flashing gradually. If fully charged, LEDs will stop
flashing and all turn blue.
Remarks:
1. Do not use it when charging.
2. Please don’t over charge the battery.
