10
Charger
-
Charger’s plug must match the outlet. Never modify the plug in any
way.
Unmodified plugs and matching outlets will reduce risk of electric
shock.
- Use your charger only to charge batteries of the type supplied with your tool.
Other batteries could burst, causing personal injury and damage.
- Only 2 battery packs is allowed to be charged continuously in order to
prevent overheating of charger, necessary rest time is required to let the
charger cool down before further charging.
- When charging is finished, unplug the charger from mains socket outlet and
take away the battery pack from the charger, do not leave the battery pack
in the charger.
- Never carry the charger by its cord or pull it to disconnect from the socket.
Keep the cord away from heat, oil and sharp edges.
- Never attempt to charge non-rechargeable batteries.
- The cord of charger is not changeable, do not continue to use if the cord is
damaged.
- Do not expose to water or rain, do not use in wet condition.
- Do not open the charger.
- Do not probe the charger.
- Intended for indoor use only
8. ASSEMBLY
- Insert the wheel to the machine head (Fig.4)
- Clip on the guard hood to the machine head and tighten it with 2 screws (11)
(Fig.5)
