USE
POSITIONING OF THE APPLIANCE
The heater should only be operated at a minimum distance of 50cm from any
wall or other object. Position the air flow in order to optimise the heating of the
room. Avoid corners, small volumes, floors and ceilings.
OPERATION
When the appliance is switched on for the first time, a slight smell may be
emitted. Please ensure sufficient ventilation. This smell will disappear very
quickly.
FUNCTION SELECTOR
0 OFF
Fan without heater
I 900W(low heat output)
II 1800W(full heat output)
Thermostat
Left (-) OFF
Right (+) Maximum
If you selected low or full output, choose the desired temperature with the
thermostat. With the thermostat, the temperature can be regulated steplessly.
When the desired temperature is reached ,the unit will automatically switch off.
Once the temperature has fallen below the per-set level ,the heater will switch on
again.
A pilot light will allow you to check the thermostatic regulation. When the
appliance is heating, this pilot light will be on. It will go out when the desired
temperature is reached.
Oscillation
This appliance also has an oscillation function. To switch the function on, press
the oscillation switch .To stop it ,press the oscillation switch again.
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the
appliance automatically in case of overheat, e.g. due to the total or partial
obstruction of the grids. In this case ,unplug the appliance ,wait about 30
minutes for it to cool and remove the object that is obstructing the grids. Then
