manualshive.com logo in svg

Eurotherm 5100V, Руководство пользователя

Поделиться
Скачать
Eurotherm 5100V Скачать руководство пользователя страница 47

100/180 MM GRAPHICS RECORDER: USER GUIDE

User Guide

Page 43

HA261742
Issue 16  Nov 04

3.4.6  CIRCULAR TREND OPTION (Cont.)

NORMAL VIEW FEATURES

Scales

Two scales are provided, one for the left hand side of the chart, the other for the right hand
side.  Channel scaling is a part of channel configuration, as described in 

section 4.3.3

, below.

The scales apply only to values along the horizontal line through the centre of the chart.
Values for other angles (times) can be most easily found from the 

trace history

, selected from

the Option key, or by touching anywhere in the chart or in the green background area for a few
seconds.

Chart speed

This displays the currently selected speed of revolution of the chart.  This speed is set up as a
part of Group configuration (

section 4.3.2

)

Faceplates

Up to 12 faceplates can be displayed, giving point values and alarm indication.

Message Bar

The message bar at the bottom of the screen displays the latest message.  If an up arrow
appears at the right hand end of the bar, there is more than one message.  Touching the mes-
sage bar calls a 'View Messages' window, detailing previous messages.  See the description in

section 3.4.2

 for more details.

FULL SCREEN DISPLAY 

As shown in figure 3.4.6c, below, this maximizes the chart diameter, leaving only the chart, chart speed and faceplates
(if selected on) on display.  The figure shows a view with faceplates selected off.  As the navigation keys are not avail-
able in this mode, Faceplate on/off selection can be made only from one of the other display modes.

Figure 3.4.6c Circular Trend full screen view (with faceplates selected off)

FULL SCREEN FEATURES

Faceplates

As described above for Normal View features

Group name

11:05:33

14/08/02

Logged out

Normal View

14/08/02 10:10

14/08/02 10:15

14/08/02 10:20

14/08/02 10:25

14/08/02 10:30

14/08/02 10:35

14/08/02 10:40

14/08/02 10:45

14/08/02 10:50

14/08/02 10:55

14/08/02 11:00

14/08/02 11:05

1 hr/rev

Содержание 5100V





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды