Eurotech PXA320 Скачать руководство пользователя

Страница: 59 / 62

Appendix D – Development Kit

110120-1000A

Appendix D – Development Kit

GCM development kits are designed to get the developer up and running quickly.

To use the development kit, simply plug the power supply into the receptacle on

the GCM.

If the screen does not display anything after five to ten seconds, check the

Frequently

Asked Questions

, below. Most operating systems cold boot within twenty seconds.

The GCM development kit consists of the following components:

•

GCM single-board computer

•

Flat panel display and cable

•

Backlight inverter and cable

•

Touch panel and cable

•

100-240 VAC power adapter

•

Plexiglass mounting

•

Developer's Cable Kit including

•

Serial Port DB9 adapter (610111-80001)

•

DB9 F/F null modem cable

•

USB A-B cable

•

Operating system of your choice

•

User's Guide (this document and operating system guide)

Please make sure you have received

all

the components before you begin your

development.

Frequently Asked Questions

The following are some of the most commonly asked questions about development kits:

Q: When I plug in power, my screen is white, and nothing comes up on it.

A: Check the connector seating. The flat panel connector may have come loose in

shipping. Press it firmly into the panel, and reapply power to your GCM.

Q: When I plug in power, the LEDs do not turn on.

A: Your GCM may still be booting. The LEDs are software-controlled and are not

necessarily turned on at boot.

Q: Do I have to turn off the GCM before I insert a CompactFlash card?

A: No. The GCM supports hot swapping of CompactFlash cards. Consult the operating

system documentation for details.

Содержание PXA320































































Результаты поиска

Содержание PXA320

Отзывы:

Похожие инструкции для PXA320

Бренды по названию

Популярные бренды

Eurotech PXA320, Руководство пользователя

Результаты поиска

Содержание PXA320

Отзывы:

Похожие инструкции для PXA320

Бренды по названию

Популярные бренды