B
A
STEP
2
Turn the workpad
Now pull the Backrest (B)
(C) outward.
up and back so that it is in a 90 position to the Seat
º
Cushion (A).
ASSEMBLY INSTRUCTIONS
CHAIR NAME AND SKU OR MODEL NUMBER
Remove all items from the carton. Verify all components before assembly.
STEP
2
PREVENTIVE
MAINTENANCE
AND
WARNING
!
• USE THIS PRODUCT ONLY FOR SEATING ONE PERSON AT A TIME.
• DO NOT USE THIS CHAIR AS A STEP STOOL / LADDER.
• DO NOT SIT ON ANY PART OF THE CHAIR EXCEPT THE SEAT.
• DO NOT USE CHAIR ON UNEVEN FLOOR SURFACES.
• DO NOT USE CHAIR UNLESS ALL BOLTS, SCREWS AND KNOBS ARE TIGHTENED.
• EVERY SIX MONTHS, PLEASE MAKE SURE ALL BOLTS, SCREWS AND KNOBS ARE
FULLY
TIGHTENED
TO
ENSURE
STABILITY
.
• IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE
PRODUCT
UNTIL
REPAIRS
ARE
MADE
USING
FACTORY
AUTHORIZED
PARTS
.
• DISPOSE OF PACKAGING PROPERLY. PLASTIC BAG IS NOT A TOY. DO NOT USE
PLASTIC
BAG
AS
HEAD
COVERING
–
IT
MAY
CAUSE
SUFFOCATION
.
• FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
• NOTE: SOME SCREWS MAY BE PREASSEMBLED. IF PREASSEMBLED, IGNORE
ASSEMBLY
INSTRUCTIONS
.
Please be careful to use the Blue Back Bolts (F).
Insert 1 Back Bolt (F) on each side of the Backrest (B) as
shown.
Tighten the bolts securely using the enclosed Allen Wrench (I).
Insert 1 Back Bolt Cover (H) over each Back Bolt (F).
STEP
1
STEP
4
STEP
3
STEP
2
Please be careful to use the correct Cup Holder Bolts (G).
Assemble the Cup Holder (E) to the storage shelf using the
Cup Holder Bolts (G).
Tighten the bolts securely using the enclosed Allen Wrench (I).
Press the Casters (D) into the holes at the bottom of
the Base and Seat Cushion (A).
EDUSKATE
G
D
D
F
G
E
C
