Eurotech EDG-604IX, Инструкция по использованию и установке

Страница: 23 / 32

23
Minimum flow adjustment Instructions for urban (G110, G120, G150.1) and methane gas (G20, G25)
1. Light the burner and bring it to the minimum position.
2. Remove the gas tap knob and turn the adjustment screw on the side of the tap
rod:

anti-clockwise to increase the gas flow

clockwise to reduce the gas flow
until a regular minimum flame is obtained.
3. Re-assemble the knob and verify burner flame stability (when quickly rotating the
hand from maximum to minimum position the flame must not shut off).
4. Repeat the operation on all gas taps.
Instructions for liquid gas (LPG: G30, G31)
Tighten the screw on the side of the tap, rod clockwise completely.
Warning: these tasks may only be carried out by a qualified technician, authorized by the
gas distributing company or authorized service center!
TECHNICAL INFORMATION (TABLE 1)
EDG-705IX EDG-604IX EDG-905IX
Appliance dimension (mm) 750 600 880
Operating voltage 220-240 V~, 50/60 Hz
Burner A: Auxiliary burner (1,0kW)
SR: Semirapid burner (1,75kW)
R: Rapid burner (3,0kW)
MW: Mini-Wok burner (3,3kW)
TC: Triple Crown burner (3,8kW)
D: Dual burner (5,5kW)
Front left A MW D
Rear left SR SR -
Front central TC - A
Rear central
- - SR
Front right
SR A SR
Rear right R SR R
Category Gas usage Natural Gas I2H ; LPG I3B/P30
Total Power (W) 11300 7800 13000
NOZZLE TABLE
Natural Gas I2H LPG I3B/P30
Model No. D TC MW R SR A D TC MW R SR A
EDG-604IX - - 128-T - 97-Z 72-X - - 85 - 65 50
EDG-705IX - 135-K - 128-H3 97-Z 72-X - 98 - 85 65 50
EDG-905IX 155-H3 / 75-H1 - - 128-H3 97-Z 72-X 98 / 47 - - 85 65 50