Eurotech ED-FLW9WH, Инструкция по эксплуатации, Страница: 10 / 20

7
_ Th _ e _ fu _ n _ c t _ io _ n _ s _ o f _ t _ h e _ c _ o _ nt _ ro _ l .;;.__ pa _ n _ e l ___ ,__
Synthetic� fj Daily
lrJJ
1200
,,.,,,-,o
'eJ
1000
c, -,:,c, �
...a
800
\JJ
600
� � �
►II
Delay
Fun lion
Sped Te p.
Start/P.ause
�
0
6 5
4
3
2
1
1. Start/Pause ( ►
II )
Press this button to start or pause a wash cycle. The door can not be open when the machine
start.The time will not be recalculated for restarting.If the washing program ending more than
10 minutes without any operation ,the machine automatically into sleeping state,Click this button
to wake up the screen.
2.
Temp.
Press this button repeatedly to change the wash temperature. The detail is in Form on page 9.
3.
Speed
Press this button repeatedly to change the spin speed. The detail is in Form on page 9.
4. Function
There are four basic functions and eleven combined functions. They are "Soak", "Rinse+",
"Anti-lroning","Pre-Wash", "Soak+Rinse+","Soak+Anti-lroning" etc. Select a suitable function by
pressing this button repeatedly.
Soak
w
This function is to increase the time of soaking clothes.
Rinse+ 'el
This function is to add an extra rinse on the program you selected.
Anti-Ironing
�
This function is to reduce the wrinkle of clothes during a washing cycle. Once this function is
selected , the machine will not execute the last drain unless the "Start/Pause" button is pressed.
(Note: The max running time of this function is 12 hours. If it exceeds 12 hours, the machine will
drain and spin automatically}
Pre-Wash \J..J
This function is to add a washing for very dirty clothes, the washing duration will be prolong.
5.
Delay
Press this button repeatedly to set the delay time of the starting of a wash cycle from 1 hour to 24
hours.
6.Knob
Turn this knob clockwise or anticlockwise to select the required wash program. Once the
"Start/Pause" button is pressed and the machine is running, the program can not be changed.
The detail is in Form on page 10.
(Note: At the end of a wash cycle, the knob must be turned to the position "o")