Eurotech ED-BIO8FDT BK, Руководство пользователя

Страница: 9 / 14

16 17
6
6
Catalytic liners
These models contain:
2 catalytic side liners(to be fitted by you)
Operation
The catalytic liners are coated with a
specially formulated enamel coating,
over a base of regular enamel.This
enamel coatinghas a rough surface
which is also porous.During normal
cooking,fats and other food spatter
is partially absorbed into the
surface and then oxidised away .This
oxidisation of the fat works best if the
oven is set at high temperatures.If you
do a lot of lower temperaturebaking,
say around the normal 180
℃
,then the
cleaning process may not be complete.
Every now and then you should turn the
oven on to 260
℃
for around one hour to
completely remove the soil.
Cleaning
Should the panels become heavily,they
will need to be taken out of the oven and
cleaned by hand.They should be soaked
in warm ,soapy water for at least 2 hour
sand then rinsed with clean water ,last
wiped clean with a soft cloth.
NOTE: Solid cleaning powders,creamy
cleaners,caustic oven cleaners,steel wool
or other scourers will ruin the catalytic
surface and must NEVER BE USED.
Removing the catalytic liner and the
catalytic fan
Detach the screws to remove catalytic
liners.
Removing the catalytic liners
Remove and replace the catalytic
fan baffle(where fitted)
Changing the Oven Lamp
Before any maintenance is started
involving electrical parts, the
appliance must be disconnected
from the power supply .
If the oven has been in use, let the
oven cavity and the heating elements
cool down before attempting any
maintenance.
Changing the bulb
Unscrew the protective cover. We
recommend that you wash and dry the
glass cover at this point.
Carefully remove the old bulb and
insert the new bulb suitable for high
temperatures (300 º C) having the
following specifications: 220-240V,
50Hz, 25W, G9 fitting.
Refit the protective cover.
IMPORTANT
Never use screwdrivers or other
utensils to remove the light cover .
This could damage the enamel of the
oven or the lampholder . Remove only
by hand.
IMPORTANT
Never replace the bulb with bare
hands as contamination from your
fingers can cause premature failure.
Always use a clean cloth or gloves.
Please note:
The bulb replacement is not covered
by your guarantee



100