16
17
6
6
Catalytic liners
(
for ED-BIO
8
FDT
SS/
B
K)
These models contain:
2 catalytic side liners(to be fitted
by you)
Operation
The catalytic liners are coated with a
specially formulated enamel coating,
over
a base of regular enamel.This enamel
coatinghas a rough surface which is also
porous.During normal cooking,fats and
other food spatter
is partially absorbed into the
surface and then oxidised away .This
oxidisation of the fat works best if the
oven is set at high temperatures.If you do
a lot of lower temperaturebaking,
say
around the normal 180
℃
,then the
cleaning process may not be complete.
Every now and then you should turn the
oven on to 260
℃
for around one hour to
completely remove the soil.
Cleaning
Should the panels become heavily,they
will need to be taken out of the oven and
cleaned by hand.They should be soaked
in warm ,soapy water for at least 2 hour
sand then rinsed with clean water ,last
wiped clean with a soft cloth.
NOTE: Solid cleaning powders,creamy
cleaners,caustic oven cleaners,steel wool
or other scourers will ruin the catalytic
surface and must NEVER BE USED.
Removing the catalytic liner and the
catalytic fan
Detach the screws to remove catalytic
liners.
Removing the catalytic liners
Remove and replace the catalytic
fan baffle(where fitted)
Fan
and
bottom
heater
on
At this oven function , the oven activates
the bottom heater and fan
function.
The mode is useful for baking low pastry
and preparation of preserved fruit
and vegetables.
Grill
heater
on
Setting the knob to this position allows
dishes to be grilled on the grate.
Warning
!
When using function grill it is
recommended that the oven door is
closed.
When the grill is in use accessible parts
can become hot.
It is best to keep children away from the
oven.
