Eurotech DynaGATE 10-06, Руководство пользователя, Страница: 67 / 72

DynaGATE 10-06 User manual Rev. 0-8 13 How to manage the product power supply
6. Connect Pin 21 (KEY IN) to a voltage level between 6 and 36 VDC ("Power IN +")
NOTICE
When you connect Pin 21 (KEY IN) to a voltage level between 6 to 36 VDC, keep it
connected for at least 10 seconds; this allows for the booting procedure to be completed
correctly.
Otherwise, an immediate and unsafe power down will occur.
7. The DynaGATE 10-06 automatically turns ON and the LED L3 (Power status) turns ON.
13.3 How to turn OFF the product
To turn OFF the DynaGATE 10-06, follow these steps:
1. Disconnect the KEY IN from Power IN +. The DynaGATE 10-06 performs a safe shut down
2. Disconnect the DC power source terminals from the Power IN interface.
13.4 How to reduce the power consumption of the product
To reduce the power consumption of the DynaGATE 10-06, turn OFF the radio interfaces and disable
unnecessary services that contribute to overall system power consumption.
13.5 How to trigger a hardware reset of the product
To trigger a hardware reset of the DynaGATE 10-06, push the reset pushbutton available in the Service
Panel.
67 / 72