Eurotech BoltGATE 20-31, Руководство пользователя

Страница: 83 / 98

BoltGATE 20-31 User's manual EN 11 Product installation and power supply
© 2022 Eurotech SpA - Via Fratelli Solari 3/A - 33020 AMARO (UD) - Italy
Code: BTGATE-20-31_MAN_EN_1-6
Revision: 1-6 2022.07.28
83 / 98
11.2 How to install the product on a DIN Rail
Prerequisite: Make sure that the DIN rail is placed horizontally.
To install the product on a DIN rail, complete the following steps:
1. Position the product so that the upper side of the Mounting bracket hooks on the upper edge of
the DIN rail, see step 1
2. Push the product downwards against the DIN rail until the lower hooked side of the Mounting
bracket lock on the lower edge of the DIN rail, see step 2 .
The product is now installed on the DIN rail.
11.3 How to remove the product from a DIN Rail
To remove the product from a DIN rail, complete the following steps:
1. Pull the lower hooked side of the Mounting bracket down so that the product is detached from the
lower edge of the DIN rail, see step 1
2. Lift the product upwards so that the upper side of the Mounting bracket is released from the upper
edge of the DIN rail, see step 2 .
The product has now been removed from the DIN rail.