EuroTech Communication GSM gateway, Руководство пользователя

Страница: 10 / 42

Februaray-2006 Page 10 / 42
MasterVoIP
VoIP to GSM Gateway
3.1.3 Basic Operations
3.1.3.1 Getting Familiar with the Key Pad and the Voice Prompt
VoIP Client ATA has a stored voice prompt menu for quick browsing and simple configuration.
To enter this voice prompt menu, simple pick up the phone and press the button on the VoIP Client ATA;
or pick up the phone and dial “ *** ” . The following table shows how to use the voice prompt menu to configure the device for
required voice prompts.
Menu Voice Prompt User
’
s Options
Main Menu “ Enter a Menu Option ” Enter ‘ * ’ to next option and “ # ” back to main menu, or
Dial 01 – 06, 47, 86 or 99 Menu option
01 “ Static IP Mode ” , or
“ Dynamic IP Mode ”
Dial ‘ 9 ’ to toggle the selection.
If user selects “ Static IP Mode ” , user will need to configure
the all IP address information through menu 02 to 05. If user
selects “ Dynamic IP Mode ” , the device will retrieve all IP
address information from DHCP server automatically when
user reboots the device.
02 “ IP Address ” + IP address The current WAN IP address is announced. Enter 12-digit
new IP address if in Static IP Mode.
03 “ Subnet ” + IP address Same as Menu option 02
04 “ Gateway “ + IP address Same as Menu option 02
05 “ DNS Server ” + IP address Same as Menu option 02
06 “ TFTP Server “ + IP address Same as Menu option 02
TFTP server is used to update the firmware of the device.
47 “ Direct IP Calling ” When entered, user will be prompted by dial tone, dial the
12-digit IP address to make a direct IP call. (For details, see
“ 4.2.2 Make a Direct IP Call ” .)
86 “ No Voice Messages ” ; or
“ Voice Messages Pending ”
If there are voice messages, user can dial ‘ 9 ’ and dial pre-
configured phone number to retrieve voice message.
99 “ RESET ” Dial ‘ 9 ’ to confirm the RESET; or
Enter MAC address to restore factory
default setting (For detail, see section 8)
“ Invalid Entry ” Automatically return to Main Menu
Notes:
 Once the LED button is pressed, it enters the voice prompt main menu. If the button is pressed
 again while it is already in the voice prompt menu state, it will jump to the “ Direct IP Calling ” option - dial tone
plays in this state.
• “ * ” shifts down to the next menu option
• “ # ” returns to the main menu
• “ 9 ” functions as the ENTER key in many cases to confirm an option
• All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address.
Once all digits are accumulated, it automatically processes them.
• Key entry cannot be deleted but the phone may prompt error once it is detected