49
Boilovers, melts,
andhot sugary
spills onthe glass
Remove these
immediately with a fish
slice, palette knife or
razor blade scraper
suitable for Induction
glass cooktops, but
beware of hot cooking
zone surfaces:
1. Switch the power to the
cooktop off at the wall.
2. Hold the blade or
utensil at a 30° angle
and scrape the soiling
or spill to a cool area of
the cooktop.
3. Clean the soiling or spill
up with a dish cloth or
paper towel.
4. Follow steps 2 to 4 for
‘Everyday soiling on
glass’ above.
• Remove stains left by melts
and
sugary food or spillovers as
soon
as possible. If left to cool on
the
glass, they may be difficult to
remove or even permanently
damage the glass surface.
• Cut hazard: when the safety
cover
is retracted, the blade in a
scraper
is razor-sharp. Use with
extreme
care and always store safely
and
out of reach of children.
Spillovers on the
touch controls
1. Switch the power to the
cooktop off.
2. Soak up the spill
3. Wipe the touch control
area with a clean damp
sponge or cloth.
4. Wipe the area
completely dry
with a paper towel.
5. Switch the power to the
cooktop back on.
• The cooktop may beep and
turn
itself off, and the touch
controls
may not function while there
is
liquid on them. Make sure
you wipe the touch control
area dry before turning the
cooktop back on.
Hints and Tips
Problem
Possible causes
What to do
The induction hob
cannot be turned
on.
No power.
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area. If
you’ve checked everything and
the problem persists, call a
qualified
technician.
