Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.23
NR ANOMALIES
CAUSES
SOLUTIONS
8
The mixture exits
the nozzle too li-
quid
1) Excessive water flow
2) Scale mixing in the
mixer
3)Obstruction oulet
material
1) Reduce the flow of water on slowly
acting control valve water
2)clean the mixer
3)Clean out the attack material
9
The mixture co-
mes o u t f r o m t
h e spraying noz-
zle too liquid.
1) excessive water flow
rate;
2) mixture scaling on the
mixer;
3) obstruction of the
material output
connection.
1) reduce the water flow rate acting
slow-ly on the water adjustment valve;
2) clean the mixer;
3) clean the material output
connection.
10
The mixture co-
mes o u t f r o m t
h e spraying noz-
zle too dense.
1) poor water quantity;
2) mixer dirty;
3) mixing chamber dirty.
parts.
1) increase the water flow rate acting
slowly on the water adjustment valve;
2) clean the mixer;
3) clean the mixing chamber
