Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.10
SAFETY INSTRUCTIONS
1.
The machine use is only reserved to qualified and trained staff in
according to the safety provision law.
2.
Always remove the voltage, turning off master switch, before to do any
operation on the machine.
3.
The master switch has also the stop emergency function in case of
necessity.
4.
Conform to use destination of the machine described in the in the
specific chapter.
5.
The disconnection of the material conveying tube, it is compulsory to
done only with pressure at zero of pressure gauge.
6.
Consult the instructions of
pre-mixed products, before to use the
machine
7.
The machine is not suitable to use in environments with potentially
explosive atmospheres (Atex)
8.
Only one operator at time on the machine
9.
The machine has not been conceived for to transport and/or lift persons
and things.
10.
Pay attention to transport the machine on slopes, danger to be run over
11.
It is absolutely forbidden to tamper, disconnect and/or remove any
safety device existing in the machine.
12.
For the safe use of the machine are recommended the following
personal protective equipment: safety footwear, protective gloves from
chemicals, goggles or face shield, earmuff.
13.
Don’t introduce objects thought the hopper protection grating. Don’t use
the machine with the open grating.
14.
It is absolutely forbidden to tamper the calibration of pressure reduction
valve.
15.
Don’t step or pull tubes and the electrical connections.
