EUROPRO EUROPROPULVE V5, Руководство пользователя

Страница: 11 / 20

201508-135A-ENG User manual - EUROPROPULVE V5 P11
5. USE OF THE ATOMIZER
5.1. PREREQUISITES
• The electric connection has to be 230 V - 16 A - 50 or 60 Hz with a 3 x 2,5 mm cable reel of 40m
maximum, completely unreeled.
• The connection to the water supply has to be on a source with a sufficient flow, with a hose of Ø19
minimum connected on the male quick-connector of the 3-way valve (7).
• The connection of the product hose has to be made on the connector (8).
• The temparature of the water used shall not be higher than +60°C.
Before each utilization of the aotmizer, verify the oil level of the pump, using the
gauge provided.
Do not use the atomizer neither in a closed room, nor in a space where the temperature
is under 0°C.
After every stop of the motor, it is important to vacuate the pressure remaining in the
hose. To do so, let the handle of the lance (4) open.