User manual - Compact-Pro 30 BASIC
202204-585-ENG
P16
8. WARRANTY CONDITIONS
Each equipment is delivered inspected and tested.
We exclude any warranty for visible defects, not notified by the customer within 48 hours.
The equipment sold is guaranteed during the manufacturer’s warranty from the date of purchase, as
specified on the original proof of purchase, and under the conditions defined by the manufacturer.
This warranty covers any equipment against any manufacturing or material defect, under normal conditions
of use. Insofar as the customer is presumed to be a professional of the same field of specialty, this warranty
covers only the defect of conception of the equipment rendering it unfit for its use, which could not be
detected by a professional buyer.
The defects or deteriorations caused by natural wear, external accident or a modification, use, storage or
treatment of the equipment not planned by the manufacturer, nor specified by ourselves, are excluded from
any warranty.
Are expressly excluded from the warranty the defects resulting from an improper use, the application of
abrasive or corrosive products, an inappropriate installation, the negligence, an insufficient maintenance
or cleaning, inappropriate conditions of storage, chemical, electronical or electric influences, any change
in the normal process of use.
The following wearing parts are not covered by the warranty (non-exhaustive list): rotors, stators, driving
shafts, connecting rods, seals, cleaning balls, spray guns, lance, nozzle, hose, needle kits, cylinders, piston
rods, prime/spray valve assy, seal kits, membranes, suction and delivery valves, carding machine vanes,
filters, oils, chains and quick-release clip.
The warranty also excludes the equipment on which the serial number was erased or made illegible, on
which unauthorized people made attempts of repair, which were totally or partially dismantled.
The manufacturer’s warranty shall always be subject to the presentation of the purchase invoice.
If the defective equipment is covered by the manufacturer’s warranty, it shall be repaired or replaced at our
discretion free of charge.
If the defective equipment is not covered by the manufacturer’s warranty, we shall issue a quote for the
repair that we shall submit to the customer for approval.
Except as otherwise required by law, this manufacturer’s warranty is exclusive of all other warranties,
including the statutory warranty of hidden defects.
In case of intervention of our services on a breakdown caused by the customer or an incident excluded in
the conditions referred to above, the costs of repair and transport shall be invoiced to the customer.
We exclude all liability for indirect damages suffered by the customer, such as, but not limited to, loss of
income, turnover, loss of profits, loss of image, of any kind whatever.
Our equipment are covered by a manufacturer’s warranty (parts and labor) of 12 months following
the purchase date by the final customer, without exceeding 24 months from the date of purchase by
the client. The final user can extend this manufacturer’s warranty for a further 12 months by filling
in the warranty extension form on our website www.euromair.com (under After-Sale Service) within
4 weeks of purchase.
This manufacturer’s warranty and its extension shall automatically cease if the customer does not
resell the equipment within 24 months of its purchase. The cases of exclusion of warranty mentioned
in articles above are also applicable to our own equipment.
