SANDBLASTER 0701AREN10MAS
3
1. MANUAL AIMED TO
EUROPE PROJECTION
has elaborated the here shown
Instructions manual and
maintenance
as a document recommended to be attached to the precision sandblaster
for its whole useful life, considering it as other component of this one.
The
Manual
is aimed to the end user and technical assistant of the equipment and it
contains every useful information on safety related to:
Assembly
Fine tuning
Use
Manteinance, including testing by the end user
Dangers caused by an inappropiate use
2. INFORMATION REMARK
This document must be at disposal of the staff using and maintaining the equipment.
In order to assure that equipment features are the same as the ones specified in your
order, please, revise it when received and contact the authorized TAS (Technical Assistance
Service) in case you find any disagreement.
For these reasons, it is recommended that every repairing or substitution of
components into the equipment is done directly by specialized staff (Consult the manufacturer
for local Technical Service)
ATTENTION:
Any modification in the original configuration of the equipment or its components, as
well as its use to a different aim for which it has been designed, will imply the
immediate invalidation of the product homologation. This will free
EUROPE PRO-
JECTION
from any responsibility as manufacturer enterprise of the commercialized
equipment.
Moreover, the homologation invalidation will be caused by:
Welding operations on the pressure device.
Mechanization operations (drills, cuts, etc.)
Different assemblies to the original one
Substitution of elements different to the original ones
Safety valve manipulation
The following actions will cause a breakdown which is be covered by the guarantee:
To work with wet abrasives or with measures higher to recommended.
To put the machine in horizontal position with the tank full of abrasive
To fill the tank with abrasive till the very top.
To use the equipment near of the air compressor
