Europlex 3806ZL, Руководство по эксплуатации

Страница: 2 / 8

OPERATING INSTRUCTIONS
FOR MODEL 3806ZL SUITE
UNIT
1
TO ARM (TURN ON) YOUR SYSTEM
1. Check the red window above the arming buttons to
see that all LEDs are off This indicates that all
protection points are normal. If any LED is lit, this
indicates that a protection point is off-normal (open)
and must be restored (closed) before the suite unit can
be armed (turned on).
2. Enter your four digit user code. Press each number
button firmly until you hear a beep. If you are not sure
that you have entered the correct digits, press the
backspace button (
* ) four times to backspace your
entry. You may then re-enter your four digit code.
3. Press the
FULL ARM
button. In a moment, the
beeper will start pulsing and the red
ARMED/ALARM LED will start flashing. You now
have 30 seconds to leave your suite.
4. If you attempt to arm the suite unit with one of the
zone LEDs lit, the suite unit will beep once and
nothing more will happen. Try and close up the zone
or see
ZONE BYPASS on page
4.