Document ID: 31080001
Rev: B
Technical Support: 1-800-626-6912
Page 11 of 16
R
EMOVING AND
R
EPLACING
I
MPELLER
Check your state and local regulations for cleaning procedures. Links to your state boards can be found on our web site,
at www.europeantouch.com. Refer to the Owner’s Manual “Clean Touch™ Pipe-Free
®
Spa - Cleaning and Disinfecting
Procedures,” for cleaning recommendations.
1.
Remove the Clean Touch
Assembly by turning it clockwise.
2.
Remove Clean Touch inlet cover
from housing by twisting counter-
clockwise.
3.
Remove the impeller by lifting from
the basin.
4.
Once the parts are clean,
complete steps one through three
in reverse order.
P
EDICURE
P
RODUCT
G
UIDELINES
Because there are so many different products on the market, it is difficult to list all of the pedicure products that
are safe to use in our pedicure spas. However, the following guidelines can be used:
•
It is your responsibility to understand and follow your state’s regulations regarding product cleaning and
disinfecting requirements.
•
Do not use any products containing a foaming agent; this will cause excessive foam.
•
It has been determined that products containing non-dissolving abrasives (such as sand and sea salts)
will not harm the internal component structure of your pedicure spa as long as the entire EUROPEAN
TOUCH cleaning requirements are followed without deviation.
•
Oil based products may be used in your pedicure spa as long as the cleaning requirements are met.
•
Please use pedicure products and cleaning solutions in accordance with each manufacturer's
directions.
EUROPEAN TOUCH pedicure spas will give you many years of service as long
as proper precautions, precise cleaning, and operating instructions are followed.
It is the responsibility of the pedicure spa user to properly clean and maintain
the pedicure spa.
