9
•
Make the center of the bracket holes and drill
plug in the wall. Secure mounting bracket firmly using 2 (ST5x25)
screws.
•
Fix the inner duct to both mounting bracket using 2 (M3x 12) screws.
•
Slide the outer duct downwards and ensure that it is well seated on the
hood body.
Installation
Wall drilling and bracket fixing
Wall mounting
•
Draw a vertical line on the at the center of the wall.
•
From bench top (see A), drawing a horizontal line (see B) above minimum
installation height level.
•
Make a reference point at C, Repeat this step on the other side.
•
Drill 8mm holes at center of marking points. Insert wall plug in the wall.
•
Fix the hood body to wall using 2 (ST5x 25) screw, tighten crew firmly. Note:
Adjust the hood body alignment if necessary.
•
Place mounting bracket on the wall at desired height level, aligning bracket
center at vertical line (see D).
