6
Note:
Press and hold POWER Button for 5 seconds to reset Filter Replace Indicator.
2. “
SPEED
” BUTTON:
The fan speed of the unit can be adjusted when the unit is in operation (L/I M/II
H/III). Each time that you press on the (SPEED) button, the speed is adjusted from L
(low) to M (medium) to H (high).
4. “
UV/ION
” BUTTON:
Press this button to turn on/off the UV lamp and Ion function.
3. “
TIMER
” BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected operating
time has elapsed.
2) Press this button (Timer) to select the required operating time. A warning light
automatically indicates the remaining operating time.
3) To select the continuous operating mode, press the button repeatedly until there
are no more indicator lights lit up.
Important note
: When the unit is not in use, switch it off and unplug it.
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The POWER light flickering continuously indicates that it is time to replace the filter.
Replace the filter according to the directions below then press the POWER button
holding for 5 seconds to restart the program system. The light will stop flickering.
*Combination Filter will last approximately 6 months.
