10
•
Fix the hood body to wall using 2 (ST5 x 25) screw, tighten the screw
firmly. Note: Adjust the hood body alignment if necessary.
•
Place mounting bracket on the wall at desired height level, aligning
bracket center at vertical line (see D).
•
Mark the center of the bracket holes and drill
8mm holes. Insert wall
plug in the wall.
•
Secure mounting bracket firmly using 2 (ST5 x 25) screws.
•
Fix the upper chimney cover to both mounting bracket using 2 (M3 x 12)
screws.
•
Slide the lower chimney cover downwards and ensure that it is well
seated on the hood body.
