Check the entire control system against the builders manuals for the correct
installation of all parts paying particular attention to the correct bolt
lengths, orientation, washers, lock nuts, castle nuts and pins. Check all rod
end bearings for correct installation and check nut security.
Check all control system attachment points (anti-servo/trim tabs, ailerons,
rudder and flaps) for correct attachment, security and operation. Check
hinge alignment and freedom from binding.
Check the tailplanes for full and free movement and security. Check the
Anti-Servo trim tabs for correct operation and freedom of movement.
Tailplane movement should be:
*
trailing edge down 4° +1°/ –0°
*
trailing edge up 12° +1°/ –0°
With the tailplanes in the neutral position set the anti-servo/trim tab with
the trim switch so that its trailing edge lines up with the tailplane trailing
edge and confirm that the pitch trim indicator needle also indicates neutral.
With the tailplanes and tabs set to zero, place your inclinometer on the flat
aft portion of the tailplanes outboard of the trim tab and make a note of the
reading.
The tailplane
trailing edge
needs to rotate 12° upwards and 4° downwards
to cover the full range required.
November 2006
XS Monowheel Motorglider
Page 7 - 6
Issue 2
Owners Manual
Содержание XS Monowheel Motorglider
