COMPONENTS
1. LED screen
2. sensor
3. air outlet
4. side window
5. power switch
6. heat switch
7. lighting screen
8. front cover
9. tray fig.1
INSTALLATION
WARNING
– The hand dryer must be earthed in accordance with the local
regulations. Failure to properly ground unit could result in severe
electrical shock and/or death. The hand dryer must be isolated from the
power supply during installation and maintenance.
Note:
A two-pole switch should be fitted between the hand dryer and the power
supply cable (see External Wiring Diagram). The terminal gauge should be
larger than 3mm.
External Wiring Diagram
1. Switch off power supply and make sure it can not be switched back on
before installation finish.
2. Place template against wall at desired height (see RECOMMENDED
MOUNTING HEIGHTS) and mark locations of 5 mounting holes and
power cord entry at knockout location (see fig.3).
Note:
for two or more dryers, dryers should be no closer than 610 mm
(24 inches) on centre.
Содержание KINOX ZJD5
Страница 1: ...KINOX ZJD5 JET HAND DRYER...
Страница 6: ...fig 6 fig 7...
