Note:
At a room temperature of about (23°) it will take about 8 minutes to reach a stable
temperature of 37° C
The display (B) shows the temperature at the sensor. This will keep on varying
around the set temperature!
The temperature of the heating stage will remain stable, as shown in the above
graphic
5) The desired temperature can be set by:
SET keep this button (G) pressed and change the temperature
By means of pressing either button (D) or (E)
For safety the maximum temperature which can be set is limited to 50°C
6) Set the switch at the front in the position 0 after use.
Eventual error codes:
The following error cades can be displayed
F1H Check if the heating stage is connected to the controller
F1L Check if the heating stage is connected to the controller
If it is there can be something short-circuit
F2* Check if the heating stage is connected to the controller
