Euromate 107439, Оригинальное руководство пользователя

Страница: 14 / 28

GB
14
Operation
Check before switching on!
Check to make sure the unit is in a safe operating
condition:
– Check to make sure there are no visible defects.
– Check to ensure that all switches have been set
to [0] , before plugging the unit into the power
socket.
Heating Prepare
Set time
– Before turn on the wall mounted heater, set the
time as right time. Press remote control [Lock]
button, light on control panel, it shows current
Room temperature.
Week
– Press [Set] button one time, [I/W] lights on,
press [–+] two buttons set the week from 1–7
(1 = Monday, 2 = Tuesday… 7 = Sunday etc.)
Hour
– Press [Set] button again, [I/H] lights on, [–+] two
buttons set the Hours from 01–00 (01 = 1 o’clock,
02 = 2 o’clock… 00 = 24 o’clock etc.)
Minute
– Press
[Set]
button again,
[Fan/M]
lights on,
[–+]
two buttons set the Minutes from 00–59 (01 = 1
Minute, 02 = 2 Minute etc.)
General Using Operation
– Turn the wall mounted heater on by pressing
the [ ] main button, the unit will blow the cold air
and [Fan/M] light is on.
– Pressing the [MODE] button, the unit will blow
the warm air and both [I/W] [Fan/M] lights are
on.
– Pressing the [MODE] button second times, the
unit will blow the hot air and both [I/W] [Fan/M]
lights are on.
– Pressing the [MODE] button Three times, the
unit will blow the cold air and [Fan/M] light is on.
24H Timer Function
– Open the appliance as working conditions, (fan,
warm, hot are all ok). Control panel [TIMER] but-
ton and remote control [24H] button are same
operate way.
– Press [TIMER] button, set the timer up to 24
hours, keep press [TIMER] button to increase
the hours from 00–24 (00 = close, 01 = 1hour,
02 = 2 hours… 24 = 24 hours ect.) and
the
[TIMER]
light is on.
Termostat Instructions
– Open the appliance as working conditions, (fan,
warm, hot are all ok). This function only through
by Remote control.
– To adjust temperature, press the [–+] to set the
desired temperature and the temperature set
from 10 °C to 49 °C.
•
When the air temperature drops 2 degree below
the set temperature, the wall mounted heater will
start heating with
[I/W]
(1000W).
• When the air temperature drops 4 degree below
the set temperature, the wall mounted heater will
start heating with
[I/H] (2000W).
• When the air temperature is
≥
the set tempera-
ture, the heater will blow cold air.
Week Timer Function
– Open the appliance as working conditions, (fan,
warm, hot are all ok). This function only through
by Remote control.
Week
– Press [W·Timer] button 1st time, [I/W] and [W-
Timer] are lights on, show [1] means [Monday] .
Hour
– Press [W·Timer] button 2nd times, [II/H] lights
on, [–+] two buttons set the Hours from 01–00
(01 = 1 o’clock, 02 = 2 o’clock… 00 = 24 o’clock
etc.)
Minute
– Press [W·Timer] button 3rd times, [Fan/M] lights
on, [–+] two buttons set the Minutes from 00–59
(01 = 1 Minute, 02 = 2 Minute etc.)
• This is open time
Hour
– Press [W·Timer] button 4th times, [II/H] lights
on,
[–+]
two buttons set the Hours from 01–00
(01 = 1 o’clock, 02 = 2 o’clock… 00 = 24 o’clock
etc.)
Minute
– Press [W·Timer] button 5th times, [Fan/M] lights
on, [–+] two buttons set the Minutes from 00–59
(01 = 1 Minute, 02 = 2 Minute etc.)
• This is close time
• The above are finised set Monday Timer.
– Press [W·Timer] button once more, [I/W] lights
on, show [2] means [Tuesday] . Pls noted that
the operate with open time Hour/Minute and
close time Hour/Minute are all same as before
Monday.
– From 1-7 (1 = Monday, 2 = Tuesday… 7 = Sun-
day etc.) are all set finished, press [Delay] button
on remote control 7th times to set from Monday
to Sunday’s temperature and press
[–+] two but-
tons, select the temperature which you need, the
temperature range from 10 °C to 49 °C.
DANGER! Risk of injury!
The unit may
only be put into operation if no defects are
found when it is checked. If a part is defec-
tive, it must be replaced before the machine
is used again.
Note: Press [Set] button, screen shows
number will twinkle 5 seconds, you should
operate in time, otherwise appliance will get
back to standby. (Appliance will keep the
right time until power off)
Note: Control panel and remote control are
same operate way.
Note: set as [00] means no set timer,
the
[TIMER]
light is off.
Note: In Week timer function, when you set
today’s temperature, the thermostat func-
tion will start, the rules same as Thermostat
Instructions, pls noted.