EN - 17
8. Rapid Wash(*)
Auxiliary
function
button 3 or 4
Rapid wash
You can wash your laundry in a shorter time,
using less energy and water by selecting
this additional function.
We recommend that you only use this
option if you are washing less than half the
maximum dry load for the selected
programme.
To select this function, press the Rapid
wash button when the symbol is
displayed.
NOTE: If you put less than half the
maximum load of laundry into your machine
the half-load function will be automatically
set, regardless of the programme you
selected. This means that the selected
programme will take less time to complete
and will use less water and energy. When
your machine detects half load, the
symbol is displayed automatically.
(*) Model Dependant
9. Start/Pause Button
Start-Pause
Washing
Rinsing
Spinning
End
To start the selected programme, press
the Start/Pause button.
If you switch your machine to standby
mode, the Start/Pause indicator on the
electronic display will blink.
10. Child Lock
The Child Lock function allows you to lock
the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
To activate child lock, press and hold button
3 and 4 simultaneously for at least 3
seconds. ‘’CL’’ will flash on the electronic
display for 2 seconds when the child lock is
activated.
If any button is pressed or selected
programme is changed by the programme
dial while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and
a programme is running, when the
programme dial is turned to the CANCEL
position and another programme is
selected the previously selected
programme continues from where it was
left.
To deactivate the child lock, press and hold
button 3 and 4 simultaneously for at least 3
seconds until the “CL” symbol on the
electronic display disappears.
5.8. Cancelling the Programme
To cancel a running programme at any time:
1. Turn the programme dial to the “STOP”
position.
2. Your machine will stop the washing
operation and the programme will be
cancelled.
3. Turn the programme dial to any other
programme to drain the machine.
4. Your machine will perform the
necessary draining operation and
cancel the programme.
You can now select and run a new
programme.
