19
TROUBLESHOOTING
Fault
Possible Cause
Solution
Light on, but motor
does not work
)DQVZLWFKWXUQHGRII
Select a fan switch position.
)DQVZLWFKIDLOHG
&RQWDFW
service centre.
Motor failed
&RQWDFWVHUYLFH
centre.
Light does not
work, motor does
not work
House fuses blown
Reset/Replace fuses.
3RZHUFRUGORRVHRU
disconnected
Refit cord to power outlet.
Switch power outlet on.
Lights not working
Insufficient suction
%URNHQ)DXOW\JOREHV
Replace globes as per this
instruction.
The distance between the
Rangehood and the gas top is
too far
Refit the Rangehood to the
correct distance.
The Rangehood
inclines
The fixing screw not tight
enough
Tighten the hanging screw and
make it horizontal.
NOTE:
$Q\HOHFWULFDOUHSDLUVWRWKLVDSSOLDQFHPXVWFRQIRUPWR\RXUORFDOVWDWHDQG
federal
ODZV3OHDVH
contact the service centre if in any doubt before
undertaking any of the
DERYH$OZD\V
disconnect the unit from the power
source when opening the unit.
M
$,17(1$1&($1'&/($1,1*
&DXWLRQ
%HIRUHPDLQWHQDQFHRU
cleaning is carried out, the
Rangehood should be disconnected from the main power
supply. Ensure that the Rangehood is switched off at the wall
socket and the plug removed.
• External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions to
ensure the best possible result is achieved without damage.
GENERAL
&OHDQLQJDQGPDLQWHQDQFHVKRXOGEHFDUULHGRXW
with the appliance cold especially
when
FOHDQLQJ$YRLG
leaving alkaline or acid substances (lemon juice, vinegar etc.) on
the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g. Weekly) to ensure long life
expectancy. Dry
ZLWKDFOHDQVRIWFORWK$
specialised stainless steel cleaning fluid may
be used.
127(
Ensure that wiping is done along with the grain of the stainless steel to prevent any
unsightly crisscross scratching patterns from appearing.
