Long press timer key for 2-3 seconds, time segment
, and
the first two hour bit segment flash, use key for the digit
increase, and use
key for the digit decrease. Namely: The
variable is 01 each time it is pressed; the hour segment is with the
largest digit of 23. If it exceeds 23, key is null and void. If it is
equal to 00, then, the
key is null and void.
Press the timer key for the 2
nd
time , time segment
, and
the last two minute bit segment flash, use key for the digit
increase, and use
key for the digit decrease. Namely: The
variable is 01 each time it is pressed; the minute segment is with
the largest digit of 59. If it exceeds 59, key is null and void. If it
is equal to 00, then, the
key is null and void.
Press the timer key for the 3
rd
time, and it is the time setting exit
and confirm key.
Long press timer key for 2-3 seconds under this operation
mode, and it is for the hour setting; Press it for the 2
nd
time:
Setting for the minute; Press it for the 3
rd
time: For the time setting
exit and confirm, and it will be repeated again and again (if the
1
st
time pressing doesn't exceed 2 seconds, then it can't run this
operating procedure.)
2. The timer key is the timer if the timer key works at either the position or
the indicator.
It is provided with three kinds of time segment, and they are
5min/15min/30min/timer cancel in sequence, and the 1
st
time is
5min, the 2
nd
time is 15min, the 3
rd
time is 30min, the 4
th
time is
timer cancel, the 5
th
time is 5min, and the 6
th
time is 15min ….,
and it will be repeated again and again.
Example: Let the setting time be 15min, the display is 00:15, 00:14,
…00:1, with 0:00 displays per minute, and once “00: 00” appears,
the motor position and the indicator power supply will be cut off
automatically, (the display screen displays “24-hour system”, the
output is blocked up, and the soot machine enters standby
status, and the backlight will be put out automatically 30
seconds later.)
Time segment change over, 5 seconds later, it starts to decrease
gradually (example: 15min is changed over to 30min, with a
delay of 5 seconds, and 00: 30 on the display screen starts to
decrease gradually).
