USER MANUAL
USER MANUAL
PG 16
PG 17
START
-
PAUSE
OPERATION
Control Panel
WATER LEVEL
WATER TEMPERATURE
DISPLAY
RINSE
DELAY
CHILD LOCK
FAST+
PROGRAM
FUNCTION
POWER
START/PAUSE
DRUM CLEAN
Select water level according to
amount of clothes loaded into the
machine where 1 is low and 8 is
high.
A solid indicator light indicates
the water level to the left (1, 3, 5,
7) and a flashing indicator light
indicates the water levels to the
right (2, 4, 6, 8).
Press this button to select
the desired number of
rinses.
Press this button to select the water
temperature. When both the
Hot
and
Cold
indicators are lit, the water
temperature is set to
Warm
.
After selecting the desired wash
settings, press this button to start
the wash cycle.
You can also use this button to
pause the washing machine
during operation.
Drum clean aids in keeping the machine
clean by pushing out dirt and grime
lodged in the drum.
A flashing LED indicates the cleaning
function will be performed during the
program.
NOTE:
The function is included in the Mixed,
Whites, Sport and Intense programs.
After selecting a Program, press the
Delay button to choose a delayed
start time. Press
Start/Pause
to
commence the delay operation.
To switch the delay start off, simply
press the button until the delay light
is off. If the program has already
started, press the
Power
button to
reset the program.
Press this button to select desired wash
functions. i.e. Soak, Wash, Rinse or Spin
or a combination of these.
Simultaneously press the
RINSE TYPE
and
PROG
. buttons to activate the
child lock. Repeat this process to
deactivate the child lock.
NOTE!
• The Child Lock function will
lock all buttons except
POWER.
Press this button to select the
desired wash program.
A solid LED indicates the
program on the left
(Mixed,
Whites, Sport, Rapid)
is selected
whereas a flashing LED indicates
the program on the right
(Daily,
Delicate, Intense)
is selected.
Fast+ is engaged by
Simultaneously pressing the
PROG.
and
TEMP.
buttons.
Repeat this process to
deactivate.
Fast+ will reduce the washing
cycle time by 20-40% by
increasing the intensity of the
agitator.
Press this button to turn
the washing machine
On or Off.
The display shows the settings, estimated time
remaining, options, and status messages for the
washing machine. The display will remain on
through the cycle.
If using the delay function, the LED will be
flashing with the remaining time before the
machine starts washing. During a washing
cycle, the LED is will be solid and show the
remaining time of the program.
NOTE!
• If there is any break in the power supply while
the machine is operating, the current program
selected will be stored in the memory and will
resume when the power supply is reconnected.
