15
LED Replacement
The LED light in this product needs to be replaced by an authorised service person, in the instance of a
failure, please contact Glen Dimplex to lodge a service call.
Normal Operation
•
The refrigerator enclosure may emit heat during operation specially in summer, this is caused
by the radiation of the condenser, and it is a normal phenomenon.
•
Condensation phenomenon will be detected on the exterior surface and door seals of the
refrigerator when the ambient humidity is large. This is a normal phenomenon, and the
condensation can be wiped away with a dry towel.
•
A buzzing noise may be heard when the compressor is running, especially when starting up or
shutting down.
Tips for Energy Saving
•
Try not to open the door too often, especially when the weather is wet and hot. Once you open
the door, close it as soon as possible.
•
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation
behind the appliance).
•
Before loading the appliance with packages of fresh food, make sure they are cooled to
ambient temperature.
•
If it is the outer condenser, the rear wall should be always clean free of dust or any impurities.
•
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
•
Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality,
or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.
This cuts down on frost build-up inside the appliance.
•
Appliance storage bin should not be lined with aluminium foil, wax paper, or paper towel. Liners
interfere with cold air circulation, making the appliance less efficient.
•
Organise and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.