10
All keys will be invalid in lock mode. Please unlock first.
ON/OFF
1. Hold down this key for 3 seconds to power down, the unit will go into
stand-by mode.
2. Hold down this key again for 3 seconds to return back to normal
operation.
Light
Press the Light key, to turn on or turn off the LED lights inside. In stand-
by mode, this key is invalid.
UP
Press the UP key once, LED display will begin flashing showing current
set temperature. Continue pressing to adjust set temperature, one press
increases temperature by 1°C. Flashing will cease after 5 seconds of no
activity and new set temperature will be saved. LED display will return to
show actual temperature inside.
Operation
Start operation
1. Cleaning the compartment
Before powering on, clean inside of the appliance and check the drainage
pipe is connected. (For details, please refer to the “Maintenance and
cleaning”).
2. Stabilising the appliance
Before powering on, level the appliance on a firm & dry floor for at least
30 minutes.
3. Power on
Once the appliance has started operation, it will cool down internally after
1 hour, otherwise you should check the power connection.
Control panel