Euromag MC608 Series, Руководство по установке, Страница: 12 / 68

fig_3_1
12 EUROMAG | MC608 | TD210-1
www.euromag.com
3. INSTALLATION OF
THE SENSOR
3.1 IDENTIFYING DATA PLATE
The plate located on the sensor carries the
following data:
• MODEL:
• PART No.: the part number identifying the
device (identification number for tracing the
identity)
• DN: nominal diameter [inches or mm]
• PN nominal pressure [bar/s]
• Temp.: maximum process temperature
• IP: international degree of protection
• ELECTRODES: composition of the material
making up the electrodes
• LINING: internal lining material
• KA: calibration coefficients
• ART.: other special guidelines
3.2 BIDIRECTIONAL READING
In the sensor, if the liquid flows:
• in the same direction of the arrow (enter by – and exit by +), the flow is positive and the display will
show a reading with no sign;
• in the opposite direction to that indicated by the arrow (enter by + and exit by –), the flow is negative
and the display will show a reading with negative sign;
FLOW
direct flow -> figure without sign negative figure-> reverse flow