EUROM 334012, Инструкция по эксплуатации, Страница: 10 / 16

10
Assembly of the stand
For both models
 Put the bottom section of the stand (including the mounting plate) onto the
foot. Invert the foot and screw the bottom section of the stand from the
bottom side with the plate and the locking nut. Return the foot to an upright
position. Place the protective cover over the connection.
 Push the middle section of the stand into the bottom section, screw-hole to
screw-hole. Secure it with four fixing screws. In the same way, secure the top
section of the stand (with the adjustable part inside) over the middle section.
 Slide the telescopic part upwards and secure it with the supplied black self-
tapping screw.
For the Tip-over model
 Put the outlet including the extension cord onto the bottom section of the
stand; the outlet should be at the top. Affix these items securely using the
supplied brackets and screws.
For both models
 Affix the appliance to the stand using the supplied locking nut.
 Check that all connections are completely secure and that the appliance is
securely positioned before using it. The appliance must be placed firmly and
sturdily on an even and completely horizontal surface.
Tip-over safeguard in the Floorstand Tip-over model
The additional outlet is made including a tip-over safeguard. It automatically
switches off the appliance in case it tips over in spite of your precautions. In that
case, remove the plug from the outlet immediately. Meticulously check the
appliance, which is attached to the stand, for damages and put it upright. Never
operate a damaged appliance but bring it to your dealer or an approved service
point for checking and/or repair. If you cannot find any damage, switch the
appliance off, insert the plug into the outlet and put the device on again. Monitor
the appliance closely for the first fifteen minutes; if any defects occur, unplug
immediately and bring it to your dealer/service point to be repaired.