9
to your supplier or a certified electrician for repairing/replacing the
part. Never carry out repairs yourself!
14.
Remove the plug from the socket and switch off the insect-killer
immediately, if you hear strange noises, smell something or see
smoke.
15.
If the electric cable or the plug is damaged, it must by replaced by
a qualified person. Never carry out repairs yourself!
16.
If the lamp, starter, fuse or any other part is defective or damaged,
it must be replaced by a qualified person. Never carry out repairs
yourself.
Operating principle and description
Operating principle
The electronic insect killers Fly Away 7-Oval and Fly Away 11-Oval attract small
flies and flying biting insects to their ultra-violet light. On their way to the lamp, the
insects fly against an electrically charged grid which destroys them quickly, hygieni-
cally and painlessly. They then fall into a removable receptacle on the underside of
the apparatus.
Description
1. Circuit-board
2. Lamp
3. High Voltage Grid
4. Collection tray
Placement
When placing and installing the insect-killer, it is important to take the location of
the device in the room/space into account.
1.
Place the insect-killer centrally in the room; that way, the ultraviolet light can be
dispersed better and attract insects from the entire area.
2.
Place the insect-killer onr a wall or in a corner if the room/area is not very large.
3.
The best height for the insect-killer is 1.5 to 2 metres off the ground, which is
the most common flying height for insects.
4.
The insect-killer can be suspended from a chain or placed on a surface such as a
table or cabinet. Make sure it is on a good stable base.
5.
Install your insect-killer in a relatively dark place: not in direct sunlight
(windows, doors), because bright sunlight weakens the insect-killer’s radiation
power. Artificial light does not weaken the radiation, but makes it work less well.
hoogte ca. 2
meter
