• Fitting:
Steel & acrylic with translucent bronze PVC shade
• Lamp type:
Excluding 1 x E27 maximum 60W 230V
• Voltage:
220-240V ~ 50/60Hz
• Protection against electric shock:
Class 2. Does not require earthing.
• IP Rating:
20. Protected against solid foreign objects of 12.5mm Ø and greater, not
protected against water.
• Not for outdoor use
• Maximum Ambient temperature range:
20ºC - 40ºC
• Dimensions:
(H)525mm x (Ø)300mm
• Spare shade:
N/A
• Feature:
Inline switch
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the fitting does not come in contact with corrosive chemicals, etc.
T264B - attachments:
If the external flexible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualified electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certificate of Compliance is updated.
• Before connecting the luminaire, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• Ensure that the correct lamp type and wattage is fitted.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, I.E. Using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire
must not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• If your mains wiring differs in any way from diagram luminaire, consult a qualified electrician.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating and wattage.
• Choking hazard: May contain small parts. Keep away from children.
• Before installation always ensure the power supply is turned off.
• Unpack on a stable flat surface and assemble as per installation illustration.
• Insert the lamp into the lamp holder.
• Plug into the electrical outlet.
• To switch the Table lamp on: Set the On/Off switch to (ON) position.
• To switch the Table lamp on: Set the On/Off switch to (OFF) position.
• Before unplugging the Table lamp from the power supply set the On / Off switch
to (OFF) position.
• Before replacing the lamp always unplug the Table lamp from the power supply
and allow to cool down.
• Ensure that the correct lamp type and wattage is fitted.
• Do not insert your fingers or any part of your body into the electrical contact and sockets of
this product whilst it is connected to the electrical supply.
• Item may vary slightly from the picture on the carton.
