EN
98
Minute Minder Timer
No matter whether a heater is activated or
not, the minute minder can be operated
by pessing , “
00
” is displayed and
shows that timer is active. The dot in the
Timer Display indicates that
and
can now be used to set the timer value.
The minute minder can be selected
when all Cooking Zone Indicators are
on or o
ff
(no Cooking Zone Indicator is
fl
ashing).
With
and
, the timer value can
be set. The minute minder timer begins
counting down once it has been set.
The minute minder cannot be stopped by
switching o
ff
the appliance or activating
the key lock function, it will continue to
count down.
After reaching the “
00
”, the timer, buzzer
sounds. To stop the buzzer, press any
button.
Heater Timer Heater
Timers can only be set when a heater
has been activated, i.e. a heater level
must be set between 1 and 9. Pressing
once will activate the Minute Minder
Timer, pressing again will assign the
timer to an activated heater. This will be
indicated by the corresponding Cooking
Zone Indicator
fl
ashing. Pressing for
a third time, after setting the
fi
rst heater
timer, will activate the timer for the next
active heater in a clockwise direction.
This will be indicated by its correspond-
ing Cooking Zone Indicator
fl
ashing.
Pressing
and
will allow the timer
to be set a value for the active heater.
The timer for the heater that was set
fi
rst
will be indicated by the illumination of its
corresponding Cooking Zone Indicator.
Pressing again allows more timers to
be assigned to the other activated heat-
ers. The Timer Display will change, 10
seconds after the last operation, to the
timer that will run out next. The number
of timers that are running will be indicat-
ed by the number of illuminated Cooking
Zone Indicators.
The timer values for the Heater Timer
and the Minute Minder Timer can be dis-
played by pressing , a Cooking Zone
Indicator will
fl
ash for the timer it is as-
signed to. If no Cooking Zone Indicator
fl
ashes, the Minute Minder Timer value
will be shown on the Timer Display.
All Heater Timers can be removed by
switching the appliance into S-Mode us-
ing , however this will have no e
ff
ect
on the Minute Minder Timer which will
continue counting down.
To remove a timer in Operation Mode,
fi
rst select the timer using the Activate/
Deactivate Timer Button until the desired
timer is displayed on the Timer Display.
It can then be removed in 2 ways:
• Decrease the value by pressing
until “
00
” appears on the Timer
Display
• Press and
simultaneously for
0.5 seconds until “
00
” is shown on the
Timer Display.
Once a timer reaches “
00
”, the level of its
corresponding heater will also set to “
0
”.
The end of both the Heater Timer and
the Minute Minder Timer is indicated by
the buzzer sound, this can be stopped
by pressing any button.
Key Lock Function
The key lock function is used to set ‘safe
mode’ on the appliance and can only
be used in Operating Mode (B-Mode).
The lock function becomes active when