EN
98
Pressing for a second time, will as-
sign a timer to one of the activated heat-
ers. The Cooking Zone Indicator will be-
gin
fl
ashing.
Pressing again, will assign the next
timer in a clockwise direction to the next
active heater, and so on.
Minute Minder Timer
The Minute Minder Timer can be oper-
ated by pressing , whether a heater
has been activated or not, and is select-
ed only when all Cooking Zone Indica-
tors are either on or o
ff
, i.e. none are
fl
ashing.
The Timer Display will show “
00
”, indi-
cating the timer is active. The decimal
point on the Timer Display indicates that
and
can now be used to set the
timer value.
The Minute Minder Timer will be-
gin counting down once it has been
set, it will not stop if the appliance is
switched o
ff
or if the Key Lock function
is activated.
Once it has reached zero, “
00
” will be
displayed on the Timer Display and the
buzzer will sound. Press any button to
stop the buzzer sound.
Heater Timer Heater
Timers can only be set when a heater
has been activated, i.e. a heater level
must be set between 1 and 9. Pressing
once will activate the Minute Minder
Timer, pressing again will assign the
timer to an activated heater. This will be
indicated by the corresponding Cooking
Zone Indicator
fl
ashing. Pressing for
a third time, after setting the
fi
rst heater
timer, will activate the timer for the next
active heater in a clockwise direction.
This will be indicated by its correspond-
ing Cooking Zone Indicator
fl
ashing.
Pressing
and
will allow the timer
to be set a value for the active heater.
The timer for the heater that was set
fi
rst
will be indicated by the illumination of its
corresponding Cooking Zone Indicator.
Pressing again allows more timers to
be assigned to the other activated heat-
ers. The Timer Display will change, 10
seconds after the last operation, to the
timer that will run out next. The number
of timers that are running will be indicat-
ed by the number of illuminated Cooking
Zone Indicators.
The timer values for the Heater Timer
and the Minute Minder Timer can be dis-
played by pressing , a Cooking Zone
Indicator will
fl
ash for the timer it is as-
signed to. If no Cooking Zone Indicator
fl
ashes, the Minute Minder Timer value
will be shown on the Timer Display.
All Heater Timers can be removed by
switching the appliance into S-Mode us-
ing , however this will have no e
ff
ect
on the Minute Minder Timer which will
continue counting down.
To remove a timer in Operation Mode,
fi
rst select the timer using the Activate/
Deactivate Timer Button until the desired
timer is displayed on the Timer Display.
It can then be removed in 2 ways:
• Decrease the value by pressing
until “
00
” appears on the Timer
Display
• Press and
simultaneously for
0.5 seconds until “
00
” is shown on the
Timer Display.
Once a timer reaches “
00
”, the level of its
corresponding heater will also set to “
0
”.
The end of both the Heater Timer and