background image

 

1

 

IMPORTANT SAFETY INSTRUCTIONS 

 

IMPORTANT

: Read the assembly instruction section and safety precautions of this booklet carefully before removing the 

contents of this carton. 

1.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction 
concerning the use of the appliance by a person responsible for their safety.  Children should be supervised to 
ensure that they do not play with the appliance.   

2.

 

After removing the packaging, make sure to check if there is any damage to the appliance. If there is any 
damage, (such as cracked glass) never attempt to install the appliance and immediately contact your retailer.  
As packaging materials can be dangerous to children, they need to be collected immediately and put out of 
reach. 

3.

 

In certain circumstances electrical appliances may be a safety hazard.  Check the conformity of voltage and 
power settings, which are specified on the information plate attached to the appliance and/or packaging, with 
the usage conditions available.   

4.

 

Do not place heavy objects in or on these appliances, or use for storage, or let children play or swing from the 
door.  These appliances are designed for cooking food only or outdoors and must be fully built in.  Do not use 
the appliances until fully installed. 

5.

 

This appliance is designed for domestic household use only and for the cooking of domestic food products.  
Use as a commercial appliance will void the warranty. It should not to be used in a marine environment or 
outdoors. 

6.

 

This appliance is supplied with a set of cables for single phase connection. This is a high-powered appliance 
and is required to be installed by an authorised person.  If the electrical supply cord is damaged, either when 
being installed or after installation, it must be replaced by the manufacturer, its service centre or similarly 
qualified persons in order to prevent a hazard. 

7.

 

The electrical connection must be accessible after installation. WARNING 

 Ensure that the appliance is 

switched off before replacing the lamp, to avoid the possibility of electric shock. The appliance is not intended 
to be operated by means of an external timer or separate remote-control system. 

8.

 

Electrical connection must be made as per local wiring rules and regulations.   

9.

 

Always grasp the oven door in the centre of the handle as the areas around the door edges may be hot due to 
the escape of hot air. Do not lift or move the appliance by pulling the handle. 

10.

 

Ensure that the kitchen is well ventilated or mechanical ventilation is in use while cooking in this appliance. 

11.

 

Do not store or use flammable materials or aerosols near the oven. Items made from aluminium, plastic or 
plastic film should also be kept away from the appliance, as they may fuse to the surface. 

12.

 

Never line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise 
the cooking and even damage the enamel. 

13.

 

WARNING - The oven will become hot during and directly after use. Do not touch any components during this 
time, as they may be hot and can cause burns.  Do not touch the heating elements inside the oven to avoid 
burns. Young children should be kept away.  Use heat resistant cooking gloves where-ever possible when 
moving food and cooking utensils in and out of the oven.  

14.

 

Cleaning may only be commenced on the appliance once it has cooled down (best slightly warm). The 
appliance should be disconnected from the power outlet or turned off at your isolation switch before 
commencing any cleaning process. Do not use a steam jet or any other high-pressure cleaning equipment to 
clean the appliance.  Follow oven cleaner directions if these are being used. 

15.

 

Wash all accessories in hot soapy water or in a dishwasher, wipe dry with a paper or cloth towel.  If you use 
your oven for an extended period of time, condensation may form. Dry it using a soft dry cloth. 

16.

 

When the appliance is not being 

used, the knobs must be kept in the ‘OFF’ position.

 

17.

 

Where this appliance is installed in a caravan, it shall NOT be used as a space heater. 

18.

 

Do not modify this appliance. 
 

 

Содержание EBO910DT





















Отзывы: