background image

• Fitting: Steel body with frosted glass.

• Lamp type: Including: 1 X R7s QI maximum 300W.

• Protection against electric shock: Class 2.  Does not require earth connection.

• IP: 20. Protected against solid foreign objects of 12.5mm Ø and greater, not 

  protected against water.

• Not for outdoor use.

• Maximum Ambient temperature range: 20ºC - 40ºC.          

• Dimensions: (H)1805mm X (W)320mm x (D) 320mm.

FL13SC -  attachments: 

If the external flexible cable or cord of this luminaire is damaged, it should be exclusively 

replaced by the manufacturer or his service agent or a similar qualified person in order 

to avoid a hazard.

To ensure that you get maximum longevity and maximum use out of your luminaire, 

please observe the following safety instructions.

Electrical products can cause death, injury, or damage to property.  

Installation of the luminaire must be carried out by a qualified electrician, in accordance 

with SANS 10142. On completion of installation, ensure that the Certificate of 

Compliance is updated.

• Before connecting the luminaire, ensure that voltage indicated on the rating label 

  corresponds with the mains voltage in your home.

• When changing the lamp, ensure that the power is turned off.

• Ensure that the correct lamp type and wattage is fitted.

• This luminaire is checked in full for conformity to the quality standards and safety 

  requirements.

• The manufacturer / supplier is not responsible for any damage of properties and 

  persons, caused by the incorrect use or installation of the luminaire.

• Should you be unsure of how to install this luminaire correctly, please consult a 

  professional electrician or your supplier for assistance.

• Ensure all items/ components, threads and screws are tightly secured.

IMPORTANT:

• Tampering with this luminaire, I.E.  Using silicon sealers or incorrect cabling, will 

  invalidate your warranty.

• When the protection glass is damaged, it should be replaced immediately.  The 

  luminaire must not be used without the protection glass.

• Please check whether the connection of the power cord is safe and reliable before 

  installation. 

• If your mains wiring differs in any way from diagram luminaire, consult a qualified 

  electrician.

• Always ensure that the mains supply voltage is correct. 

• Always replace the lamp with one of an identical rating and wattage.

• Choking hazard: May contain small parts.  Keep away from children.

• Do not insert your fingers or any part of your body into the electrical contact and 

  sockets of this product whilst it is connected to the electrical supply.

• Item may vary slightly from the picture on the carton.

• Coastal humidity may effect the longevity of the luminaire.

• Outdoor luminaires must be cleaned to prevent rust occurring.

SPECIFICATIONS

IMPORTANT SAFEGUARDS

INSTALLATION

CLEANING

• Before cleaning always ensure the power supply is turned off.

• Do not immerse the luminaire in water.

• No abrasive products, solvents, detergent may be used to clean this luminaire.

• Ensure that the fitting does not come in contact with corrosive chemicals, etc.

• 

Before installation always ensure the power supply is turned off.

• 

Unpack and and assemble luminaire on a sturdy surface.

• 

Screw in the stem of lamp as per steps 1, 2 and 3. 

• Pull out the power cord as per step 4.

• Screw in the lamp shade as per step 5. 

• Secure power cord into place as per step 6.

• Insert lamp as per step 7. and fasten into place as per step 8 and 9.

• 

Insert the lamp into the lamp holder.

• 

Plug into the electrical outlet.

• To switch the lamp on:  Set the On/Off switch to (ON) position.

• To switch the lamp off:  Set the On/Off switch to (OFF) position.

• Before unplugging the floor lamp from the power supply set the On/Off switch to 

  (OFF) position.

• Before replacing the lamp always unplug the floor lamp from the power supply 

  and allow to cool down.

• Ensure that the correct lamp type and wattage is fitted.

Отзывы: